Wire Harness Solutions
Custom Manufacturing | OEM/ODM
Automotive | Industrial | Electronics
UL/CE/RoHS Certified
100% Electrical Testing Guarantee
Product Center
How to Distinguish Positive and Negative Terminals of a DC Power Adapter | Reverse Polarity Protection Safety Guide and Selection Recommendations
Read More+
How much does a waterproof power adapter cost? IP67-grade quotation plan and certification explanation
Read More+
Shenzhen Power Adapter Manufacturer Hub | 3C Certified Factory Direct Supply
Read More+
36V Industrial Power Adapter Wholesale High-Stability PFC Energy-Saving Type 3C Certified Factory Direct Supply
Read More+
Which industrial power cable harness manufacturer is the best? High-reliability certified factory direct supply, supporting custom batch delivery
Read More+
Custom Vehicle DC Power Cable Harness - IATF16949 Certified, Supporting Automotive-Grade Harness Batch Delivery
Read More+
High-Current DC Power Cable Harness Customization | High Current Carrying Capacity & Low Impedance · UL-Certified Factory Direct
Read More+
New Energy Vehicle DC Wiring Harness Supplier | UL Certified · High Protection Rating · Batch Delivery
Read More+
Ultrasonic Metal Welding Machine for Aluminum Wire: Zero Spatter, High Conductivity, Military-Grade Quality Certification
Read More+
Ultrasonic Metal Welding Machine Operation Video Tutorial: Full Process Demonstration from Beginner to Mastery
Read More+
Ultrasonic Metal Welding Machine vs Resistance Welding: Why Superior Conductivity and Reliability
Read More+
Metal Ultrasonic Welding Machine Fault Repair Methods: Rapid Troubleshooting and Resolution Guide
Read More+About Us
About us and company introduction
Shenzhen Winna Technology Co., Ltd. is a comprehensive service enterprise focused on industrial manufacturing and technical solutions, with business covering three major areas: power adapters and power solutions, AC/DC cable harness assemblies, and ultrasonic metal welding technology. Leveraging China's complete manufacturing supply chain and rich industry resources, we are committed to providing global customers with high-quality products, customized solutions, and professional technical support services.
To serve customers across different industries more professionally, Winna Technology operates its headquarters in Shenzhen along with three major manufacturing bases, each focusing on product R&D, manufacturing, and market services in their respective fields.
Power Adapter Base
Power Adapter
View All →
Cable Harness Base
Cable Harness
View All →
Ultrasonic Welding Base
Ultrasonic Welding
View All →
300K+
Adapter Monthly Output
1M+
Harness Monthly Output
500+
Employees
100+
Patents & Certifications
CE
UL
FCC
RoHS
ISO 9001
PSE
KC
Our Laboratory
Laboratory & Quality
To ensure product quality remains at the industry-leading level, we continuously invest in advanced testing equipment and inspection facilities, and have assembled an experienced quality management team.
RoHS Tester +
Suitable for quantitative screening of hazardous substances (lead, mercury, cadmium, hexavalent chromium, etc.) in power adapters, wiring harnesses, and plastic housings. During incoming material inspection and outgoing shipment sampling, it tests metal coatings, plastic particles, and solder materials one by one, ensuring each batch of finished products complies with international environmental regulations such as RoHS and REACH, thereby avoiding export market compliance risks.
Plating Thickness Tester +
Applied for measuring coating thickness on AC/DC wiring harness terminals and ultrasonic welding machine electrode tips. Using X-ray fluorescence for non-destructive measurement of micron-level thickness of gold and tin plating layers, verifying coating uniformity. Regular sampling during production prevents increased contact resistance and reduced insertion/withdrawal lifespan due to thin coatings, ensuring stable signal transmission of connectors during long-term use.
Salt Spray Tester +
Used for corrosion resistance testing of power adapter metal housings, wiring harness connectors, and ultrasonic welding machine frames. In a continuous 48-72 hour salt spray environment, it observes whether the sample surface shows red rust, blistering, or coating peeling. Products passing this test can be safely used in ships, offshore platforms, and high-humidity industrial scenarios, meeting customer requirements for anti-corrosion levels of outdoor equipment.
Pull-Out Force Tester +
On AC/DC wiring harness production lines, samples are taken from each batch for pull-out force testing of terminals and wires. The pull force threshold is set according to UL 486A standards to check the mechanical strength of crimping areas. When actual values fall below the standard, the machine is immediately stopped to calibrate crimping dies, preventing quality issues such as poor contact or circuit open circuits caused by loose terminals, ensuring finished products meet safety certification requirements.
Video Measurement System +
Used for two-dimensional dimension measurement of precision mold parts, injection-molded housings, and connector terminals. Using high-magnification optical lenses combined with image recognition algorithms, it automatically compares dozens of critical dimensions within 0.5 seconds. In the new product development phase, it is used for first-article confirmation; during mass production, it monitors dimensional shifts caused by mold wear, ensuring assembly dimension fluctuations remain within the ±0.05mm tolerance range.
Constant Temperature and Humidity Chamber +
Performs environmental stress screening on power adapter finished products and ultrasonic welding machines from -40℃ to +85℃ with humidity 0-95%RH. Each mass-produced model undergoes at least 200 hours of accelerated aging testing, monitoring drift in electrical performance parameters (output voltage, current, ripple) during thermal cycling. This test verifies product suitability for global cold, tropical, and high-altitude regions.
Hi-Pot Tester (Glow Wire Tester) +
Suitable for dielectric strength testing of AC/DC wiring harness insulation layers. A high voltage of 1500-3000V is applied between the conductor and the insulation surface to monitor for breakdown discharge (glow wire phenomenon). During harness production, each core wire is tested online to prevent leakage and short circuit risks caused by insulation damage, making it a critical inspection step for ensuring products pass UL/CUL safety certifications.
Wire Bending Tester +
Simulates repeated bending and dragging of power adapter output wires and finished harnesses during daily user use. With a bending angle of ±90° and frequency of 60 cycles/minute, after 5000-10000 continuous bends, it checks conductor strand breakage rate and insulation damage. During the R&D selection phase, it evaluates the fatigue resistance of different conductor stranding structures and insulation materials, ensuring stable electrical connections even under harsh usage conditions.
Reflow Oven +
Used for soldering process validation of power adapter PCB assemblies. By setting a four-to-six-zone temperature profile, it simulates the entire process of preheating, activation, reflow, and cooling for lead-free solder. After the first piece of each batch is soldered, X-ray inspection checks solder joint void rate and wetting angle, ensuring soldering reliability for complex packages like BGA and QFN, avoiding early field failures caused by batch soldering defects.
Carrier Tape Peel Force Tester +
For incoming material inspection of SMD component packaging used on ultrasonic welding machine control boards and power adapter PCBs. It measures the force required to peel SMD components from embossed carrier tape, ensuring it falls within the standard range of 0.1-1.0N. If the force is too low, components may fall off during transport; if too high, pick-and-place machines may fail to pick them up. This test ensures SMT line placement efficiency and yield.
Hygrometer +
Deployed as 24/7 environmental monitoring points in SMT workshops, material warehouses, and testing laboratories. It records humidity data in real-time and coordinates dehumidification/humidification systems to keep ambient humidity within the target range of 30-60%RH. Particularly during humid seasons, it prevents soldering splashes, bubbles, and injection molding defects caused by moisture absorption in PCBs, solder paste, and plastic pellets, reducing process quality fluctuations at the source.
Continuity Tester +
The final comprehensive electrical performance testing equipment for all AC/DC wiring harness finished products before shipment. A single test completes three key indicators: continuity (detecting misalignment, short circuits, open circuits), insulation resistance (≥100MΩ@500V), and dielectric strength (AC 1500V/1mA without breakdown). Test data is automatically recorded and assigned a unique serial number for traceability, matching the ERP system to achieve full-process quality traceability from raw materials to finished products.
Hardness Tester +
Used for hardness testing of power adapter housing injection-molded parts and ultrasonic welding machine tool head metal parts. Plastic parts are tested with a Shore durometer to ensure sufficient impact strength without brittleness; metal parts are tested with a Rockwell hardness tester to verify the effectiveness of heat treatment processes. Used during incoming material inspection and mold trial stages, it prevents cracking or excessive wear caused by material hardness non-conformities at the source.
Vibration Tester +
Performs simulated transportation vibration testing on power adapter finished products and ultrasonic welding machines. A 10-55Hz sweep vibration and random vibration spectrum are set, with accelerated testing executed for 2 hours per axis in X/Y/Z directions. After testing, it checks for loose screws, cracked housings, and detached internal components, evaluating the product's packaging protection scheme and structural design reliability, ensuring product performance integrity during long-distance shipping and field use.
Why Choose Us
Why Choose Winna
Quality Control System
Certified under ISO9001:2015 Quality Management System, establishing full-process quality control from raw materials to finished product delivery.
R&D and Manufacturing Capability
2000+ sqm production facility, with a complete manufacturing chain from R&D design to mass production, supporting OEM/ODM.
Global Service Network
Serving 1000+ clients, products exported to Europe, America, Southeast Asia, the Middle East and other regions, providing localized technical support.
Fast Response
Sample delivery within 3 days, bulk orders delivered in 15-30 days, with dedicated project follow-up.
Partners
Trusted by Industry-Leading Brands
Success Stories
CASE
New Energy High-Voltage Harness Terminal Welding | Electric Vehicle Busbar Connection
Ultrasonic Battery Tab Welding | Lithium Battery Cell Electrode Welding
Ultrasonic Copper-Aluminum Busbar Welding | Dissimilar Metal Joining Process
Ultrasonic Terminal Welding | Precision Welding of Copper Terminals and Wires
Ultrasonic Wire Harness Welding | Demonstration of Solid-State Welding Process for Multi-Strand Copper Wires
Germany Tier 1 automotive parts supplier Busbar welding equipment audit
Brazilian Battery Manufacturer: Inspection and Procurement of Ultrasonic Welding Equipment
Technical resources
25
04
XHP terminal wire harness | XHP Wire Harness: Crimping vs Ultrasonic Welding for AC/DC
2026-09-25
XHP terminal wire harness customization delivers high-reliability AC/DC connections for industrial automation and smart home appliances, with durable, flame-retardant custom solutions.
Industrial Power Adapter – UL/CE Certified, Stable Output, Factory Direct
2026-08-04
Industrial Grade Power Adapter with Stable Output, UL/CE Certified – Factory Direct Supply, Quality Assured, On-Time Delivery. Ideal for B2B Bulk Purchasing and